When you want to do a concrete project this upcoming winter season, you must get ready in case a freeze happens. Keep on reading this article to know the factors you should take into account before you begin to pour the concrete during the winter.
As you work during the cold season, the best way to keep warm is to wear layers. Once the temperature begins to increase, you can always take off the extra layers you wore. Also, wearing a hoodie can be helpful to protect your head and ears, while wearing rubber boots with thick wool socks are a good way to make sure that your feet are protected.
Bringing temporary on-site heat
You can immediately warm up your feet and hands by bringing a temporary heater outside while you do the job. This will help you without running inside your house from time to time. If you keep your hands warm, you can prevent frostbite and guarantee that your precise motions won’t be affected by stiff and numb hands.
The weather within the time your project is performed
The ideal temperature must approximately be 28 degrees Fahrenheit outside. Once the temperature of the air decreases below 25°, then your newly poured concrete will freeze. If you just mix the concrete with hot water, it must be between 65 to 70 degrees Fahrenheit when it is poured. To figure out and come up with a plan for this issue, make sure to be updated on your area’s daily weather forecast.
Whether the sub-base is frozen or not
When the sub-base has frost on it, make sure to only pour it until it has totally thawed. When you pour the sub-base over frost, expect it to crack as soon as the ground dethaws. To make this process fast, you can utilize ground heaters to help the dirt be completely thawed.
The sub-base that you’ll pour
If you pour concrete onto a plastic vapor above the dirt or directly onto the dirt, a cold sub-base usually sucks out the concrete’s heat rapidly. For this reason, you should delay pouring concrete especially when the temperatures are less than 28 degrees Fahrenheit.
The total sum of time the concrete will sit in the chute
When you let concrete sit in the chute for a long time during the frosty weather, then expect your concrete to freeze. Instead, make sure that it won’t be left in the chute for more than 5 minutes. To put it simply, it’s best to work as fast as you can.
Protecting the concrete after troweling it
As soon as the concrete is smooth and has been troweled, it should be secured from the cold. You can place a tarp and insulating blankets to make sure that the slabs are kept warm. Also, don’t forget to add weighted objects such as wood on top to hold down the tarp.
Hire the concrete experts
If you’re unsure about all these tips and how to properly do them, then it’s best to just hire the professional concrete contractors in Lubbock TX today.